Adaptor pentru biti cu sectiune mica

5,88Lei

Disponibilitate:
1
Cod produs:
DSFT-308239
Marca:
Juuma

Nu a fost încă evaluat
Scrie un comentariu
Our braces have, at the base of the chuck, a square hole to hold immobile the square end of the shaft of various kinds of bits. The size of the hole is designed to accept the most common sizes of square-ended bits. There are however a variety of square-ended bits that are too small to be securely held in the normal, 8 x 8 mm hole. So if used in this brace, they will be held only by the four jaws and can turn or come loose under pressure. With this simple, inexpensive adapter, this problem can be solved. It is a section of square brass tube (in the photo down and to the right). Placed in the square hole at the base of the chuck, it reduces the 8 x 8 mm hole to 6 x 6 mm to hold smaller bits firmly in place. More...
Outside diameter 8 x 8 mm
Inside diameter 6 x 6 mm
Material thickness 1 mm
Length 18 mm

Scrie un comentariu

Notă: codul HTML nu este interpretat!

Rău            Bun


Continuă

Livrare

Livrăm rapid în toată ţara prin GLS Curier la tariful unic de 19 lei (indiferent de greutate) | Sau puteți ridica personal produsele din magazinul nostru (Timișoara, Piața Traian nr 6, colț cu str. Anton Pann). NU mai expediem cu Fan Curier datorita problemelor repetate si nerezolvate sistematic!

Contactați-ne

0745 858 618 (L-V, 10:00 - 18:00)
Orar showroom Timișoara: L-V, 10:00 - 18:00
office@finetools.ro