Genno - 375 g

156,42Lei

Disponibilitate:
3
Cod produs:
DSFT-309705
Marca:
Generic

Nu a fost încă evaluat
Scrie un comentariu

Lungime totală - 33 cm

Greutate - 375 g

Genno - that’s what the Japanese call these hammers. Selective hardening of the striking surfaces means that part of the recoil energy is absorbed by the somewhat softer core of the steel. You feel you’re working more effectively, also because less of the recoil energy makes it way back to the wrist joint.
 
These square and octagonal hammer heads have one flat and one slightly convex striking face. Use one or the other face, depending on the job at hand. The flat face, for instance, is used for tapping chisels or for driving in nails close to the inside edge of a workpiece. The cheeks of the hammer head glide over the surface of the workpiece, so you can be sure that the striking face is exactly at right angles to it. This provides you with the best chance of knocking in small nails dead straight even in an inconvenient location. For setting nails you use the convex face of the hammer to minimise the risk of damaging the surrounding wooden surface.
 
In Japan, metal hammers are the tools of choice even for chiselling work; for optimal results here pick the 375 g hammer. Of course, your aim will have to be a bit better than with a wooden mallet.

Scrie un comentariu

Notă: codul HTML nu este interpretat!

Rău            Bun


Continuă

Livrare

Livrăm rapid în toată ţara prin GLS Curier la tariful unic de 19 lei (indiferent de greutate) | Sau puteți ridica personal produsele din magazinul nostru (Timișoara, str. Divizia 9 Cavalerie nr. 49). NU mai expediem cu Fan Courier datorita problemelor repetate si nerezolvate sistematic!

Contactați-ne

0745 858 618 (L-V, 10:00 - 18:00)
Orar showroom Timișoara: L-V, 10:00 - 18:00
office@finetools.ro