Ryoba GOKUI Black Super Deluxe 240 mm

395,79Lei

Disponibilitate:
Cu precomandă
Cod produs:
DSFT-313515
Marca:
Yoshiwaka
OUT OF STOCK

Wish List   Comparație

Acest excepțional fierăstrău japonez tip Ryoba este rezultatul colaborării dintre doi cunoscuți producători de fierăstraie, Yoshiwaka și Ikeda, din orașul japonez Miki. Partea de rip-cut (taiere longitudinală), incorporeaza din

Fierăstrăul este comercializat sub brandul "GOKUI", care în limba japoneza semnifică "cel mai înalt nivel al măiestriei a fost atins".

Lungimea lamei: 240 mm

Grosimea lamei lângă dinți: 0.5 mm

Grosimea lamei în mijloc: 0.35 mm

Kerf ripcut: 0.7 mm 

Kerf crosscut: 0.7 mm

Pas ripcut: 2.5 to 5 mm (10 - 5 TPI) 

Pas crosscut: 1.4 mm (18 TPI)  

 

The smiths have developed a saw that on the ripcut side, includes "raker" teeth. Rip cut saws in principle have relatively coarse teeth. These raker teeth ("Ikeda-Me"), for which Ikeda has a patent, make for a finer rip cut. 

Black Super Deluxe Ryoba GOKUI 

This saw is hand-forged, and uniformly hardened. The saw blade, as one often finds with high-quality traditional ryoba saws, is forged so that the middle of the blade is thinner than the edges in order to reduce friction with the wood. This feature is achieved with scrapers, removing very fine shavings from the middle of the blade. So the saw is about 0.5 mm thick at the teeth, but about 0.35 mm in the center of the blade. The shaft is forged to about 1 mm thick, to give the blade more strength and stiffness where it enters the hand grip. This makes for a very durable tool!
On the rip cut edge, every 5th and 6th tooth is a raker tooth, for faster and cleaner sawing. 
 


Räumzähne für Längsschnittseite 

Räumzähne für Längsschnittseite
Although Japanese cross-cut saws already are made with these raker teeth, on this saw the tooth geometry has been adjusted for a much more effective cut. The cross-cut side of this saw allows not only fast and clean cross cuts, but also performs very well when cutting on the diagonal. Even very fine rip cuts are possible! 

raker teeth 

raker teeth

 

 

 

Scrie un comentariu

Notă: codul HTML nu este interpretat!

Rău            Bun


Continuă

Livrare

Livrăm rapid în toată ţara prin GLS Curier la tariful unic de 19 lei (indiferent de greutate) | Sau puteți ridica personal produsele din magazinul nostru (Timișoara, str. Divizia 9 Cavalerie nr. 49). NU mai expediem cu Fan Courier datorita problemelor repetate si nerezolvate sistematic!

Contactați-ne

0745 858 618 (L-V, 10:00 - 16:00)
Orar showroom Timișoara: L-V, 10:00 - 18:00
office@finetools.ro